iron

Doors are built with 14 gauge steel framing. The wrought iron designs are built with solid 3/4" diameter iron bars - bent, shaped, hammered and twisted until the desired effect is achieved. In our wood and iron doors, the wrought iron used is solid 1/2" iron bar. The doors are 1 3/4" thick. Doors are prehung with standard size 2" x 4" jambs. Any custom sizes can be made.           

glass frame

A hinged glass frame comes ready to accomodate 1/2" tempered glass, which opens inwards to allow for ventilation or for cleaning of the glass. The frame can be customized to hold any size of glass and must be specified at the time of order. In the wood and iron doors, the wrought iron panels are hinged to open outwards in order to clean the glass.

hardware

We use heavy duty ball bearing hinges. Sliding extension flush bolts are installed in double doors and hold the doors top and bottom. Pull handles (shown below) and lock are included at no extra charge.

P1                P2                  P3                  P4                   P5               P6                P7

paint

Our doors are primed with an anti rusting zinc phospate solution, then two coats of an oil based paint are applied and then a final coat of urethane sealer. We can paint to any color of finish, including metallic, textured and antique paint finishes.

Doors are fully sealed all around the frame with solid rubber and foam stripping. Iron thresholds are optional at no extra charge.